• Home
  • Programmable Power Supplies

Programmable Power Supplies

Programmable Power Supplies | Laboratory Power Supplies

Programmable Power Supplies

LAB SMP LAB-SMP

1.2kW - 2.4kW

  • Analogue and Computer Interfaces
  • CV, CC, CP & CR Operating Modes
  • Both Current and Voltage Presets
  • User Programable Waveforms
  • Extremely Compact 1U Design
  • Up to 94% Efficiency

Lab SMS ELAB-SMS-E

3kW - 10kW

  • Constant Current & Constant Voltage Modes
  • Compact Design (10kW in 2U)
  • Single Phase Option up to 5kW
  • Master/Slave Option

 

LAB HP LAB-HP Series

5kW - 15kW

Low noise switched mode design
Voltage ranges from 0 - 40Vdc to 0 - 1200Vdc, Current ranges from 0 - 4A to 0 - 275A
Optional Remote programming and monitoring of voltage and current, Parallel & master/slave operation up to 6 units & 90kW.
Optional IEEE 488.2 interface with LabVIEW driver, Optional SD Card slot

labtc LAB-TC Series

10kW - 2MW

Advanced IGBT based design
Voltage ranges from 0 - 52Vdc to 0 - 1000Vdc, Current ranges from 0 - 13A to 0 - 700A
Remote programming and monitoring of voltage and current, Remote sense, Parallel & Grid operation up to 2MW, Built in RS232.
Optional LabVIEW and C/C++

Lab GSS LAB-GSS Series (Bi-Directional)

20kW-32kW

Bi-Directional Power Supply
Source from 65Vdc to 600Vdc (upto 32kW)
Sink 6Vdc to 600Vdc (upto 32kW)
Grid Tied design allowing for lower energy costs and less wastage

Our Laboratory Power Supplies range from 30 Watts up to 32kW and can be extended to 2 Mega Watts if required. Voltage ranges from 0 - 6Vdc to 0 - 1000Vdc, and current ranges from 0 - 0.5A to 0 - 700A. Single or Dual output models are available, and there is also the possibility to add an optional IEEE488.2 interface which is supplied complete with a LabVIEW driver on most models.

If you would like to discuss your application in more detail please call us on +44 (0) 2476 214799 or fill out and submit the form on the left of this page.