LAB-GSS (Bi-Directional Power Supply)
LAB-GSS Series Bi-Directional Power Supply (Source/Sink)
Part Number | Description | Datasheet | Further Information | |
---|---|---|---|---|
LAB-GSS 20-65 | 20kW Lab Power Supply 0 - 65V, 0 - 385A output | ![]() | Enquire Here | 0 |
LAB-GSS 20-130 | 20kW Lab Power Supply 0 - 130V, 0 - 192A output | ![]() | Enquire Here | 0 |
LAB-GSS 20-400 | 20kW Lab Power Supply 0 - 400V, 0 - 63A output | ![]() | Enquire Here | 0 |
LAB-GSS 20-500 | 20kW Lab Power Supply 0 - 500V, 0 - 50A output | ![]() | Enquire Here | 0 |
LAB-GSS 20-600 | 20kW Lab Power Supply 0 - 600V, 0 - 40A output | ![]() | Enquire Here | 0 |
LAB-GSS 32-65 | 32kW Lab Power Supply 0 - 65V, 0 - 600A output | ![]() | Enquire Here | 0 |
LAB-GSS 32-130 | 32kW Lab Power Supply 0 - 130V, 0 - 308A output | ![]() | Enquire Here | 0 |
LAB-GSS 32-400 | 32kW Lab Power Supply 0 - 400V, 0 - 100A output | ![]() | Enquire Here | 0 |
LAB-GSS 32-500 | 32kW Lab Power Supply 0 - 500V, 0 - 80A output | ![]() | Enquire Here | 0 |
LAB-GSS 32-600 | 32kW Lab Power Supply 0 - 600V, 0 - 66A output | ![]() | Enquire Here | 0 |
Product Summary
The LAB-GSS is able to operate as either a DC Source or an Electronic DC Load. This new integrated approach features high
dynamics enabling the user to switch quickly between quadrants. When sinking energy from the unit under test the LAB-GSS
automatically inverts the DC to AC and synchronises this output to the grid. A variety of control methods are available. As
standard each module is built with isolated analogue and RS232 interfaces. Front panel control and display along with IEEE
488.2 (GPIB), USB, RS422, CAN & Ethernet interfaces are optionally available. A comprehensive software program is provided
for operation over the serial or LAN interface. Along with standard output settings the GUI gives access to a host of second level
parameters. Voltage and current slopes can be set and protection levels tweaked. Enhanced additional capacitance is provided
as standard, making the LAB-GSS ideal for constant voltage applications such as battery simulation. Sense compensation can
be programmed and PID controllers adjusted. This helps ensure that the LAB-GSS can be optimised for particular applications.
A useful bonus is the built in 8 channel recording scope for seeing what is actually on the output. Trigger events, such as a
particular current or power level, can be selected. The time resolution and number of sampling points can also be adjusted.
Previous scope traces together with the channel and trigger configurations can be imported back into the GUI for analysis.
To find the unit most suited to your requirements simply look in the model table above, or view the pdf data sheet
If you would like to discuss your application in more detail please call us on +44 (0) 2476 214799 or fill out and submit the form on the left of this page.