• Home
  • Variable Power Supplies

Variable DC Power Supplies

Product Range

Variable DC Power Supplies

LD Series

30W - 1000W

Linear regulated, High accuracy
Voltage ranges from 0 - 7.5Vdc to 0 - 150Vdc, Current ranges from 0 - 0.5A to 0 - 20A
Remote programming of voltage and current, Remote sense, Parallel & master/slave operation.
Optional IEEE 488.2 interface with LabVIEW driver

ZAS Series

600W - 2.4kW

Low noise switched mode design
Voltage ranges from 0 - 20Vdc to 0 - 120Vdc, Current ranges from 0 - 5A to 0 - 80A
Remote programming and monitoring of voltage and current, Remote sense
Optional RS232/485, IEEE 488.2 interface

GEN Series

750W - 15kW

Low noise switched mode design
Voltage ranges from 0 - 6Vdc to 0 - 600Vdc, Current ranges from 0 - 1.3A to 0 - 600A
Remote programming and monitoring of voltage and current, Built in RS232/485, Remote sense
Optional IEEE 488.2 interface

XFR Series

1.2kW - 2.8kW

Low noise switched mode design
Voltage ranges from 0 - 7.5Vdc to 0 - 600Vdc, Current ranges from 0 - 2A to 0 - 220A
Remote programming and monitoring of voltage and current, Remote sense
Optional IEEE 488.2 interface

ZPS Series

3kW - 30kW

Low noise switched mode design
Voltage ranges from 0 - 20Vdc to 0 - 400Vdc, Current ranges from 0 - 10A to 0 - 400A
Remote programming and monitoring of voltage and current, Remote sense, Parallel & master/slave operation up to 3 units.
Optional IEEE 488.2 interface with LabVIEW driver

LAB-HP Series

5kW - 15kW

Low noise switched mode design
Voltage ranges from 0 - 40Vdc to 0 - 1200Vdc, Current ranges from 0 - 4A to 0 - 275A
Optional Remote programming and monitoring of voltage and current, Parallel & master/slave operation up to 6 units & 90kW.
Optional IEEE 488.2 interface with LabVIEW driver, Optional SD Card slot

LAB-TC Series

10kW - 2MW

Advanced IGBT based design
Voltage ranges from 0 - 52Vdc to 0 - 1000Vdc, Current ranges from 0 - 13A to 0 - 700A
Remote programming and monitoring of voltage and current, Remote sense, Parallel & Grid operation up to 2MW, Built in RS232.
Optional LabVIEW and C/C++

Product Summary

Our Laboratory Power Supplies range from 30 Watts up to 32kW and can be extended to 2 Mega Watts if required. Voltage ranges from 0 - 6Vdc to 0 - 1000Vdc, and current ranges from 0 - 0.5A to 0 - 700A. Single or Dual output models are available, and there is also the possibility to add an optional IEEE488.2 interface which is supplied complete with a LabVIEW driver on most models.

If you would like to discuss your application in more detail please call us on +44 (0) 2476 214799 or fill out and submit the form on the left of this page.