250W-500W ELA Series

ELA Series Electronic DC Loads

250W-500W ELA Series
Part NumberDescriptionDatasheet Further Information
ELA250/75/20D250W Electronic Load 0.35 - 75V, 0.01 - 20AClick for datasheetBuy Now10
ELA250/75/40D250W Electronic Load 0.35 - 75V, 0.01 - 40AClick for datasheetBuy Now20
ELA250/160/20D250W Electronic Load 0.35 - 160V, 0.01 - 20AClick for datasheetBuy Now30
ELA505/75/50D500W Electronic Load 0.35 - 75V, 0.01 - 50AClick for datasheetBuy Now40
ELA505/75/100D500W Electronic Load 0.35 - 75V, 0.01 - 100AClick for datasheetBuy Now50
ELA505/160/50D500W Electronic Load 0.35 - 160V, 0.01 - 50AClick for datasheetBuy Now60
ELA1500/40/200D1500W Electronic Load 1 - 40V, 0.01 - 199AClick for datasheetBuy Now70
ELA1500/75/100D1500W Electronic Load 1 - 75V, 0.01 - 100AClick for datasheetBuy Now80
ELA250/75/1 Precision250W Electronic Load 0.35 - 75V, 0 - 1AClick for datasheetEnquire Here2
ELA250/75/2 Precision250W Electronic Load 0.35 - 75V, 0 - 2AClick for datasheetEnquire Here4
ELA250/75/4 Precision250W Electronic Load 0.35 - 75V, 0 - 4AClick for datasheetEnquire Here6
ELA250/75/5 Precision250W Electronic Load 0.35 - 75V, 0 - 5AClick for datasheetEnquire Here8
ELA250/75/8 Precision250W Electronic Load 0.35 - 75V, 0 - 8AClick for datasheetEnquire Here9

Product Summary

The ELA Series Electronic DC Loads can operate in standalone, parallel, or master-slave modes, and are suitable for bench top use or 19" rack mounting (via optional full width or 6U high module front plate).

They can be manually operated via the potentiometers on the front, via an external 0-10Vdc signal, or they can be fitted with an optional IEEE 488.2 interface which comes complete with LabVIEW drivers. Some models now also have USB connection.

Operating in constant current mode as standard, the ELA Series loads can be adapted for constant power / resistance with the optional "R Module".

To calculate the maximum current of a unit at your required voltage simply divide the wattage of the units in the model table above by the voltage of the device to be tested, or view the corresponding pdf data sheet.

If you would like to discuss your application in more detail please call us on +44 (0) 2476 214799 or fill out and submit the form on the left of this page.